Gravity

  • GS-CMP100
  • GS-TSL100

GS-CMP series over Load annunciating system senses the load of the Car & warns the passenger about the Over Loading of the car to make the trip free from stoppage/breakdown due to Over Load.

Tare facility for the dead weight of the car to measure the live load applied.

Interfacing/Interlocking with the main controller avoids false warnings while LIFT is in movement.

FEATURES:

  • Shear Beam compression type sensing  for gross weight measurement.
  • Tare facility to measure live load on the LIFT.
  • Interfacing with the main controller to avoid false warnings.
  • High Resolution A/D converter for better accuracy.
  • Digital read out for the weight.
  • On site calibration facility.
  • On site settings for Tare weight.
  • Programmable Alarm settings.
  • Available for 3 or 4 nos. of  Strain Gauge Load Cells with gross capacity of 6 Tons.

SPECIFICATIONS:

Supply Voltage 230VAC or 12/24 VDC
Supply Current 0.050Amp
Available  for Max. Gross Weight 4000 Kgs.
Display 4 Digit ,Red LED Display
Signal Input Voltage, DC (optically  isolated input type) 12V/24V
Signal Current, DC (optically isolated input type) 20mA,Max.
Alarm O/P 1 CO, 230 VAC,3A rated---2 nos.
Controller Module  Size (mm) 120mm(H)*200mm(W)*75mm(D)
Operating Free-air Temperature Range 0°C to 50°C
Storage Temperature Range -10°C to 70°C
Humidity 0% to 95% non condensing
Available Options
  • 2-Wire Interface.
  • Display for Car.

GS-TSL  series over Load annunciating system senses the load  of the Car & warns the passenger about the Over Loading of the car to make the trip free from stoppage/Breakdown  due to Over Load.

Tare facility for the dead weight of the car to measure the live load applied.

Interfacing/Interlocking  with the main controller avoids false warnings while LIFT is in movement.

FEATURE:

  • Wire rope tension measurement.
  • Shear Beam tension type sensing  for gross weight measurement.
  • Tare facility to measure live load on the LIFT.
  • Interfacing with the main controller to avoid false warnings.
  • High Resolution A/D converter for better accuracy.
  • Digital read out for the weight.
  • On site calibration facility.
  • On site settings for Tare weight.
  • Programmable Alarm settings.
 

SPECIFICATIONS

Supply Voltage  230VAC or 12/24 VDC
Supply Current 0.050Amp@230VAC
Available  for Max. Gross Weight 4000 Kgs.
Display 4 Digit ,Red LED Display
Signal Input Voltage, DC
(optically  isolated input type)
12V/24V
Signal Current, DC
(optically isolated input type)
20mA,Max.
Alarm O/P 1 CO, 230 VAC,3A rated---2 nos.
Indicator Module  Size (mm) 120mm(H)*200mm(W)*75mm(D)
Operating Free-air
Temperature Range
0°C to 50°C
Storage Temperature Range -10°C to 70°C
Humidity  0% to 95% non condensing
Available Options
  • 2-Wire Interface.
  • Display for Car.