MRL Control Panel

Salient Features:
  • Perfect integration for Control Logic & V3F drive of elevator leads to compact structure, few wiring, high reliability, easy operation & cost efficiency.
  • Double 32 – bit MCU combines the elevator control and motor control
  • Direct to Floor Landing Give jerk less starting & stopping
  • Full featured LCD Keyboard tool for programming & Debugging
  • Analog Weighing Device Interface.
  • Redundant safety design, Double safety protection for control & Drive.
  • CAN Bus communication for COP, LOP & other accessories make the whole system rugged, easy, fast & reliable.
  • Support speed – 4.0 m/s.
  • Support traditional Group control and DDS – Destination Dispatching System control & IOT.
  • LIFT Debugging from COP by connecting programming tool in COP Board.
  • Support one main Contactor solution.
  • Support Geared (Asynchronous) and Gearless (Synchronous) motor.
  • Sin /Cos. Endat, ABZ Incremental Resolver Interface.
  • Support Auto Door & Manual Door Lift Logic.
  • Use PIM module, lower loss in switch on and off and longer lifetime.
  • Creative zero speed torque compensation technology provides the elevators with good starting ride quality without installing weighing devices.
  • Close loop vector brings higher performance in control.
  • New PWM dead – zone compensation technology brings less energy loss.
  • Dynamic PWM carrier modulation technology brings less motor noise.

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Application Model Description Options
AS380 Based Integrated Control Panel INTL-380-64L 64 Landing Full Collective
  • Customized Control Panel Enclosure for MRL application.
  • Pre Door opening.
  • Group / Duplex Control.
  • Double Door Function.
  • DDS – Destination Dispatching System control.
  • IOT – Internet of Things for remote monitoring of LIFT.
  • Community Monitoring System.

Related products

    Step

    Parallel Type Controller
    Salient Features:
    • Perfect Integration of Control Logic and V3F Drive of elevator leads to compact structure, less wiring, high reliability, easy operation and cost-efficiency.
    • Double 32 – bit MCU combines the elevator control and motor control.
    • Full featured LCD Keyboard tool for programming & Debugging.
    • Direct to Floor Landing Give jerk less starting & stopping.
    • Redundant safety design, Double safety protection for control & Drive.
    • All parallel input and output.
    • Support speed – 2.5 m/s.
    • Support one main contactor solution.
    • Support Geared (Asynchronous) and Gearless (Synchronous) motor.
    • Sin /Cos. Endat, ABZ Incremental Resolver Interface.
    • Support Auto Door & Manual Door Lift Logic.
    • Use PIM Module Hardware, lower loss in switch on & off and longer lifetime.
    • Creative zero speed torque compensation technology provides the elevators with good starting ride quality without installing weighing devices.
    • New PWM dead – zone compensation technology brings less energy loss.
    • Dynamic PWM carrier modulation technology brings less motor noise.
    (0 reviews)
    Read more
    Step

    STEP Products
    Salient Features:
    • Attractive & Sturdy Design for larger Application.
    • Machine Room Type, MRL Type & Customised Enclosures.
    • Digital Voltage Protection Relay to protect control system against Input Voltage fluctuation.
    • Mains Isolated supply for Field Interlocking, Brake & CAM using Isolation control transformer.
    • Line chock to protect VVVF.
    • Natural cooling OR Forced cooling to prevent heating inside the control room.
    • Stable Power Supply – SMPS with EMI / RFI noise filter.
    • STOP, Auto / Inspection command section to operate LIFT from control panel.
    Download Brochure
    (0 reviews)
    Read more
  • Step

    Serial Can Bus Type Controller
    Salient Features:
    • Perfect integration for Control Logic & V3F drive of elevator leads to compact structure, few wiring, high reliability, easy operation & cost efficiency.
    • Double 32 – bit MCU combines the elevator control and motor control
    • Direct to Floor Landing Give jerk less starting & stopping
    • Full featured LCD Keyboard tool for programming & Debugging
    • Analog Weighing Device Interface.
    • Redundant safety design, Double safety protection for control & Drive.
    • CAN Bus communication for COP, LOP & other accessories make the whole system rugged, easy, fast & reliable.
    • Support speed – 4.0 m/s.
    • Support traditional Group control and DDS – Destination Dispatching System control & IOT.
    • LIFT Debugging from COP by connecting programming tool in COP Board.
    • Support one main Contactor solution.
    • Support Geared (Asynchronous) and Gearless (Synchronous) motor.
    • Sin /Cos. Endat, ABZ Incremental Resolver Interface.
    • Support Auto Door & Manual Door Lift Logic.
    • Use PIM module, lower loss in switch on and off and longer lifetime.
    • Creative zero speed torque compensation technology provides the elevators with good starting ride quality without installing weighing devices.
    • Close loop vector brings higher performance in control.
    • New PWM dead – zone compensation technology brings less energy loss.
    • Dynamic PWM carrier modulation technology brings less motor noise.
    (0 reviews)
    Read more